Cause Samsung clp 325n needs to be adjust:
– Samsung clp 325n’s cartridge have a toner chip that was used for count toner coverage & to deliver bold or light printoutquality depending on Samsung clp 325n printers original printout design.
– Samsung clp 325n toner cartridge chip contains counted limitation that was managed by Samsung company. Samsung define if toner coverage is 5 percent, Samsung clp 325n toner cartridge chip is allowed 3.000 – 15.000 times
– If toner coverage is over 7 percent -> Toner Page Yields are less than “3.000 or 15.000” sides If toner coverage is lower than 7%, Toner Page Yields are “3.000 or 15.000” print pages. That is the reason why bold printouts (high toner coverage) will make printers operate out of toner faster.
– When Samsung clp 325n toner chip overload its counted restriction, Samsung clp 325n will be locked inspire of high toner cartridge.
What is message Samsung clp 325n needs to be adjust?
- Samsung clp 325n printer’s show alert: red light flashing, imprinting.
- Computer’s messages: empty toner, Change toner, installing toner, end of life renew new cart , toner cartridge is not install, Install the cartridge, toner exhausted.
Solution to meliorate Samsung clp 325n with imprinting error:
Have 3 answer to repair your Samsung clp 325n printers.
Way 1. Change new toner cartridge for Samsung clp 325n printer
– Samsung clp 325n’s toner cartridge price about $50 – $193 depending on its supplier and manufacturer.
– Remove old toner and put to work new toner cartridge seems to be suboptimal because when printers runs out of toner, we also need to replace toner cartridge => money wasting
Solution 2. Replace toner chip for Samsung clp 325n’s toner cartridge
– Samsung clp 325n’s toner cartridge chip cost $7 to $22 depending on its supplier.
– Changing toner chips seems to be more optimal but when printer runs out of toner, we also must be change new toner chip.
Way 3. reset permanently Samsung clp 325n by using software reset
– Samsung clp 325n’s adjust software cost around $10 – $20 USD (almost costs around $12)=> saving money
– adjust application automatically impacts to printer firmware so printer ignores paper counters. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
Have Fun
