How to resetup Samsung ml 1660 printer counters – red light blinking

Cause Samsung ml 1660 printer must to be reset:

Samsung ml 1660 toner cartridge is enclosed with a toner chip that was using for count toner coverage & to deliver bold or light printoutquality depending on Samsung ml 1660 printer original printout design.

Samsung ml 1660 toner cartridge chip contains counted limitation that was managed by Samsung manufacturer. Samsung define if toner coverage is 4%, Samsung ml 1660 toner chip is enabled 3.000 – 15.000 sides

 instruction adjust counters Samsung ml 1660 printer

– If Samsung ml 1660 toner coverage is higher than 7% -> Toner Page Yields are less than “3.000 near 15.000” pages. If toner coverage is lower than 7 percent, Toner Page Yields are “3.000 : 15.000” sides That is the reason why bold printouts (high toner coverage) will make printer put to work out of toner quicker.

– When Samsung ml 1660 toner chip overload its figure out restriction, Samsung ml 1660 will be locked inspire of high toner cartridge.

What is errors appear Samsung ml 1660 must to be adjust?

  • Samsung ml 1660 printer’s show messages: red light blinking, imprinting.
  • Computer’s messages: empty toner, Change toner, installing toner, end of life regenerate new cart , toner cartridge is not install, Install the cartridge, toner exhausted.

Three fix Samsung ml 1660 with imprinting error:

You have three answer to fix your Samsung ml 1660 printer.

Way 1. Change new toner cartridge for Samsung ml 1660 printer

– Samsung ml 1660’s toner cartridge costs about $84 – $200 depending on its supplier & manufacturer.

 adjust counters Samsung ml 1660 printers by replace toner cartridge

– Remove old toner & proceed new toner cartridge seems to be suboptimal because when printers runs out of toner, we also need to replace Samsung ml 1660 toner cartridge => money wasting

Remedy 2. Change new toner cartridge chip for Samsung ml 1660’s toner cartridge

 regenerate new toner cartridge chip for Samsung ml 1660 printer

– Samsung ml 1660’s toner cartridge chip cost $7 -> $20 depending on its supplier.

– Changing toner chips seems to be more optimal but when printer runs out of toner, we also need to change new toner cartridge chip.

Way 3. adjust permanently Samsung ml 1660 by using software reset

adjust counter Samsung ml 1660 printer by firmware reset

– Samsung ml 1660’s adjust windows program price around $13 – $90 USD (almost costs around $12)=> money saving

– adjust middleware automatically impacts to printer firmware so printers ignores paper counters. Therefore, there is not necessary to change toner cartridge chip, you just refill toner when it runs out.

Have a nice day