Cause Samsung scx 4728fd needs to be reset:
– Samsung scx 4728fd’s cartridge have a toner cartridge chip that was using to figure out toner coverage & to deliver bold or light printout quality depending on Samsung scx 4728fd printer original printout design.
– Samsung scx 4728fd printer toner chip contains figure out limitation that was managed by Samsung company. Following Samsung, if toner coverage is 6%, Samsung scx 4728fd toner chip is delivered 3.000 – 15.000 sides
– If toner cartridge coverage is over 6% -> Toner Page Yields are less than “3.000 – 15.000” times If toner coverage is lower than 6 percent, Toner Page Yields are “3.000 to 15.000” print page. That is the reason why bold printouts (high toner coverage) will make printer run out of toner faster.
– If Samsung scx 4728fd toner cartridge chip overload its calculated limitation, printer will be locked inspire of high toner cartridge.
What is errors appear Samsung scx 4728fd must to be reset?
- Samsung scx 4728fd printer’s errors: red light blinking, imprinting.
- Computer’s messages: empty toner, Change toner, installing toner, end of life renew new cart , toner cartridge is not install, Installing the cartridge, toner exhausted.
Remedys to fix Samsung scx 4728fd with imprinting problem:
You have 3 fix to reset your Samsung scx 4728fd printers.
Solution 1. Change new toner cartridge for Samsung scx 4728fd printer
– Samsung scx 4728fd’s toner cartridge Pay about $50 – $200 depending on its supplier & manufacturer.
– Changing toner cartridge seems to be suboptimal because when printers runs out of toner, we also need to change new toner cartridge => money wasting
Solution 2. Replace toner chip for Samsung scx 4728fd’s toner cartridge
– Samsung scx 4728fd’s toner cartridge chip costs $5 to $20 depending on its supplier.
– Changing toner cartridge chips seems to be more optimal but when printers runs out of toner, we also must be change new toner cartridge chip.
Remedy 3. reset permanently Samsung scx 4728fd by using firmware adjust
– Samsung scx 4728fd’s reset freeware costs around $11 – $60 USD (almost Fee around $14)=> money saving
– adjust windows program automatically impacts to printers firmware so printers ignores paper counters. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
Good luck!
