Help resetup Samsung scx 4300 printer counter -> red light turned on and off repeatedly

Reason Samsung scx 4300 printer must to be reset:

Samsung scx 4300’s cartridge is work with a toner chip that was used to count toner coverage and to deliver bold or light printout quality depending on Samsung scx 4300 printer original printout design.

– Samsung scx 4300 printer toner chip contains counted limitation that was managed by Samsung. Samsung think if toner coverage is 6%, Samsung scx 4300 toner chip is permit 3.000 – 15.000 print pages.

 solution adjust counters Samsung scx 4300 printer

– If toner coverage is over 6 percent -> Toner Page Yields are less than “3.000 to 15.000” pages. If toner coverage is lower than 6%, Toner Page Yields are “3.000 : 15.000” print page. That is the reason why bold printouts (high toner coverage) will make printers proceed out of toner quickly.

– If Samsung scx 4300 toner chip overload its counted restriction, Samsung scx 4300 will be locked inspire of high toner cartridge.

What is errors appear Samsung scx 4300 must to be adjust?

  • Samsung scx 4300 printer’s show messages: red light turned on and off repeatedly, imprinting.
  • Computer’s messages: empty toner, Replace toner, install toner, end of life change new cart , toner cartridge is not installed, Install the cartridge, toner exhausted.

Three fix Samsung scx 4300 with imprinting error:

We have 3 solution to repair your Samsung scx 4300 printer.

Remedy 1. Replace toner cartridge for Samsung scx 4300 printer

– Samsung scx 4300’s toner cartridge Pay around $84 – $192 depending on its supplier & manufacturer.

 adjust counter Samsung scx 4300 printer by replace toner cartridge

– Remove old toner and proceed new toner cartridge seems to be suboptimal because when printer runs out of toner, we also must be change new toner cartridge => money wasting

Remedy 2. Change new toner chip for Samsung scx 4300’s toner cartridge

 replace new toner cartridge chip for Samsung scx 4300 printer

– Samsung scx 4300’s toner cartridge chip Fee $7 – $20 depending on its supplier.

– Changing toner chips seems to be more optimal but when printers runs out of toner, we also need to change new toner cartridge chip.

Remedy 3. adjust permanently Samsung scx 4300 by using firmware reset

adjust counters Samsung scx 4300 printer by firmware adjust

– Samsung scx 4300’s adjust application Fee about $14 – $90 USD (almost Pay about $10)=> money saving

– reset software automatically impacts to printers firmware so printer ignores paper counters. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.

Have Fun