Cause Samsung ml 5510 needs to be reset:
– Samsung ml 5510 toner cartridge have a toner cartridge chip that was using for calculate toner coverage & to deliver bold or light printout quality depending on Samsung ml 5510 printers original printout design.
– Samsung ml 5510 printer toner cartridge chip contains calculated limitation that was managed by Samsung company. Samsung define if toner coverage is 6 percent, Samsung ml 5510 toner cartridge chip is about 3.000 – 15.000 pages.
– If toner cartridge coverage is over 5% -> Toner Page Yields are less than “3.000 near 15.000” times If toner coverage is lower than 4%, Toner Page Yields are “3.000 or 15.000” pages. That is the reason why bold printouts (high toner coverage) will make printer use out of toner more quickly.
– If Samsung ml 5510 toner cartridge chip overload its figure out restriction, Samsung ml 5510 printer will be locked inspire of high toner cartridge.
What is errors appear Samsung ml 5510 needs to be reset?
- Samsung ml 5510 printer’s messages: red light blinking, imprinting.
- Computer’s messages: empty toner, Change toner, installing toner, end of life change new cart , toner cartridge is not setup, Install the cartridge, toner exhausted.
Have three remedy to mend Samsung ml 5510 with imprinting problem:
We have three correct to reset your Samsung ml 5510 printer.
Remedy 1. Change new toner cartridge for Samsung ml 5510 printer
– Samsung ml 5510’s toner cartridge price about $50 – $204 depending on its supplier & manufacturer.
– Changing toner cartridge seems to be suboptimal because when printer runs out of toner, we also need to change new Samsung ml 5510 toner cartridge => money wasting
Way 2. Replace toner cartridge chip for Samsung ml 5510’s toner cartridge
– Samsung ml 5510’s toner chip costs $5 to $22 depending on its supplier.
– Changing toner chips seems to be more optimal but when printers runs out of toner, we also must be change new toner chip.
Way 3. reset permanently Samsung ml 5510 by using firmware reset
– Samsung ml 5510’s adjust middleware costs around $10 – $20 USD (almost Fee around $14)=> saving money
– reset software automatically impacts to printer firmware so printer ignores paper counter. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
Good luck!
