Why Samsung ml 1866w needs to be reset:
– Samsung ml 1866w’s cartridge is enclosed with a toner cartridge chip that was used for calculate toner coverage & to deliver bold or light printout quality depending on Samsung ml 1866w printers original printout design.
– Samsung ml 1866w toner chip contains counted limitation that was managed by Samsung. Following Samsung, if toner coverage is 5%, Samsung ml 1866w toner chip is allowed 3.000 – 15.000 times
– If Samsung ml 1866w toner cartridge coverage is more than 5 percent -> Toner Page Yields are less than “3.000 – 15.000” print pages. If toner coverage is lower than 5%, Toner Page Yields are “3.000 or 15.000” print page. That is the reason why bold printouts (high toner coverage) will make printer run out of toner faster.
– If Samsung ml 1866w toner cartridge chip overload its counted limitation, Samsung ml 1866w will be locked inspire of high toner cartridge.
What is errors appear Samsung ml 1866w needs to be adjust?
- Samsung ml 1866w printer’s show alert: red light blinking, imprinting.
- Computer’s messages: empty toner, Renew toner, install toner, end of life change new cart , toner cartridge is not installed, Installing the cartridge, toner exhausted.
Have three correct to fix Samsung ml 1866w with imprinting error:
Have 3 set right to repair your Samsung ml 1866w printer.
Solution 1. Change new toner cartridge for Samsung ml 1866w printer
– Samsung ml 1866w’s toner cartridge costs around $85 – $200 depending on its supplier & manufacturer.
– Changing toner cartridge seems to be suboptimal because when printer runs out of toner, we also must be change new toner cartridge => money wasting
Remedy 2. Change new toner cartridge chip for Samsung ml 1866w’s toner cartridge
– Samsung ml 1866w’s toner chip Fee $4 -> $25 depending on its supplier.
– Changing toner cartridge chips seems to be more optimal but when printer runs out of toner, we also must be change new toner cartridge chip.
Remedy 3. adjust permanently Samsung ml 1866w by using software adjust
– Samsung ml 1866w’s reset middleware cost about $8 – $90 USD (almost costs around $12)=> money saving
– adjust freeware automatically impacts to printers firmware so printers ignores paper counter. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
Have a nice day
