Why Samsung sl m2625d printer needs to be reset:
– Samsung sl m2625d’s cartridge is work with a toner cartridge chip that was using to count toner coverage and to deliver bold or light printoutquality depending on Samsung sl m2625d printer original printout design.
– Samsung sl m2625d toner chip contains figure out limitation that was managed by Samsung company. Samsung think if toner coverage is 5 percent, Samsung sl m2625d toner chip is allowed 3.000 – 15.000 times
– If toner cartridge coverage is more than 7% -> Toner Page Yields are less than “3.000 to 15.000” times If toner coverage is lower than 6 percent, Toner Page Yields are “3.000 near 15.000” times That is the reason why bold printouts (high toner coverage) will make printer use out of toner more quickly.
– If Samsung sl m2625d toner chip overload its counted restriction, printer will be locked inspire of high toner cartridge.
When Samsung sl m2625d needs to be adjust?
- Samsung sl m2625d printer’s messages: red light turned on and off repeatedly, imprinting.
- Computer’s messages: empty toner, Regenerate toner, installing toner, end of life regenerate new cart , toner cartridge is not setup, Installing the cartridge, toner exhausted.
Solution to fix Samsung sl m2625d with imprinting error:
Have three set right to adjust your Samsung sl m2625d printer.
Way 1. Change new toner cartridge for Samsung sl m2625d printer
– Samsung sl m2625d’s toner cartridge costs around $60 – $194 depending on its supplier & manufacturer.
– Changing toner cartridge seems to be suboptimal because when printers runs out of toner, we also need to change new Samsung sl m2625d toner cartridge => money wasting
Solution 2. Replace toner chip for Samsung sl m2625d’s toner cartridge
– Samsung sl m2625d’s toner cartridge chip Pay $6 => $25 depending on its supplier.
– Changing toner cartridge chips seems to be more optimal but when printer runs out of toner, we also must be change new toner cartridge chip.
Remedy 3. adjust permanently Samsung sl m2625d by using firmware reset
– Samsung sl m2625d’s adjust middleware price about $14 – $20 USD (almost price around $14)=> save your money
– adjust software automatically impacts to printer firmware so printer ignores paper counter. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
do this post helpful for you?
