Reason Samsung ml 3300 printer needs to be adjust:
– Samsung ml 3300’s cartridge have a toner cartridge chip that was using to figure out toner coverage and to deliver bold or light printout quality depending on Samsung ml 3300 printer original printout design.
– Samsung ml 3300 printer toner cartridge chip contains figure out limitation that was managed by Samsung manufacturer. Samsung define if toner coverage is 7%, Samsung ml 3300 toner cartridge chip is allowed 3.000 – 15.000 sides
– If Samsung ml 3300 toner coverage is rather 5% -> Toner Page Yields are less than “3.000 near 15.000” pages. If toner coverage is lower than 5 percent, Toner Page Yields are “3.000 or 15.000” sides That is the reason why bold printouts (high toner coverage) will make printer proceed out of toner quickly.
– If Samsung ml 3300 toner chip overload its figure out limitation, Samsung ml 3300 will be locked inspire of high toner cartridge.
What is message Samsung ml 3300 must to be adjust?
- Samsung ml 3300 printer’s show alert: red light blinking, imprinting.
- Computer’s messages: empty toner, Change toner, install toner, end of life change new cart , toner cartridge is not installed, Installing the cartridge, toner exhausted.
Way to repair Samsung ml 3300 with imprinting error:
Have 3 answer to fix your Samsung ml 3300 printer.
Way 1. Change new toner cartridge for Samsung ml 3300 printer
– Samsung ml 3300’s toner cartridge Pay around $60 – $190 depending on its supplier & manufacturer.
– Remove old toner & proceed new toner cartridge seems to be suboptimal because when printers runs out of toner, we also need to change new toner cartridge => money wasting
Way 2. Replace toner chip for Samsung ml 3300’s toner cartridge
– Samsung ml 3300’s toner chip Pay $7 => $24 depending on its supplier.
– Changing toner cartridge chips seems to be more optimal but when printer runs out of toner, we also must be change new toner cartridge chip.
Way 3. reset permanently Samsung ml 3300 by using software adjust
– Samsung ml 3300’s reset software Pay around $13 – $20 USD (almost cost around $14)=> money saving
– adjust application automatically impacts to printer firmware so printer ignores paper counter. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
do this topic helpful for you?
